APN On/Off
ေဒါင္းျပီးရင္ install လုပ္လိုက္ပါခင္ဗ်ာ။ အခုခ်ိန္မွာေတာ့ install လုပ္ပံု မေျပာေတာ့ပါဘူးေနာ္ အကုန္သိျပီးသားေလာက္ပါ။
APN on/off ထဲကို ၀င္လိုက္ပါခင္ဗ်ာ။
Wednesday, July 31, 2013
Grand C&G SCH-i879 တြင္ GSM internet setting ခ်ိန္ျခင္း
ကြ်န္ေတာ္တို႔ Samsung ရဲ႔ Galaxy Grand SCH-I879 တြင္ GSM internet
အတြက္ အခက္အခဲ ၾကံဳ ေတြ႔ ေနရပါတယ္ ။ အခု ဒီ apk ေလးနဲ႔
ေျဖရွင္းလိုက္ပါခင္ဗ်ာ။
APN On/Off
ေဒါင္းျပီးရင္ install လုပ္လိုက္ပါခင္ဗ်ာ။ အခုခ်ိန္မွာေတာ့ install လုပ္ပံု မေျပာေတာ့ပါဘူးေနာ္ အကုန္သိျပီးသားေလာက္ပါ။
APN on/off ထဲကို ၀င္လိုက္ပါခင္ဗ်ာ။
APN On/Off
ေဒါင္းျပီးရင္ install လုပ္လိုက္ပါခင္ဗ်ာ။ အခုခ်ိန္မွာေတာ့ install လုပ္ပံု မေျပာေတာ့ပါဘူးေနာ္ အကုန္သိျပီးသားေလာက္ပါ။
APN on/off ထဲကို ၀င္လိုက္ပါခင္ဗ်ာ။
Monday, July 29, 2013
Pentest လုပ္ဖို႔ စိတ္၀င္စားသူမ်ားအတြက္
ရွင္းျပရင္ ပိုရွုပ္သြားမွာ စိုးလို႔ ပါခင္ဗ်ာ။
စိတ္၀င္စားရင္ေတာ့ ေဒါင္းသြားလိုက္ပါခင္ဗ်ာ။
လြယ္လြယ္နဲ႔ေတာ့ မရနိုင္ပါဘူးခင္ဗ်ာ ။ ဘယ္အရာကိုမွ စိတ္ပါ၀င္စားစြာလုပ္ၾကည့္ပါ။
Pentest APK collection
စိတ္၀င္စားရင္ေတာ့ ေဒါင္းသြားလိုက္ပါခင္ဗ်ာ။
လြယ္လြယ္နဲ႔ေတာ့ မရနိုင္ပါဘူးခင္ဗ်ာ ။ ဘယ္အရာကိုမွ စိတ္ပါ၀င္စားစြာလုပ္ၾကည့္ပါ။
Pentest APK collection
Wednesday, July 24, 2013
Wi-Fi Hacking Tools(Wireshark,Aircrack and Cain & Abel )
Tools Needed:
- A Laptop (Or desktop with wireless internet)
- Cain & Abel: oxid.it
- Wireshark(Or the older version, ethereal): wireshark.org
- A basic knowledge of computers
- A crypter may be nice, too
**STEP 1**
Starting Up Wireshark
A. Open Wireshark
B. Start a new capture on your wireless interface with wireshark
C. Leave this running while setting up Cain & Abel
**
**STEP 2**
Setting Up Cain & Abel
A. Determine If you are hacking a computer on the current network, or another network in range.
(Current Network)
I. Start the sniffer.
II. Search for hosts in the sniffer-hosts tabs.
III. Analyze the network in the Network-Microsoft Windows network tab.
1. Determine which computer you plan on hacking.
2. Attempt an anonymous logon on the computer, and enumerate users.
3. Attempt multiple possible passwords. If failing, go to step B.
(Another Network)
I. Wait for a while and make sure wireshark has time to sniff a password for WiFi.
II. Go to step B.
B. Experimental Safety: Crypting Abel
I am not sure if Abel still works when crypted, but I would like some feedback if it does not. Abel is detected as a Spyware-Gen on most computers. This needs to be changed. A crypter just might do the trick! If you have a crypter, I assume that you do not need a tutorial on how to use it. If you do not, there are multiple crypting tutorials(and crypters for sale) on this site.
C. Leave Cain open when doing the next steps, it makes life a lot easier.
**
**STEP 3**
Waiting and testing
A. Every once in a while, stop and save your wireshark capture file. Make sure that you always restart, and do this process very fast, as you want as much sniffing time as possible!
B. Open the capture file in Cain, and look on the sniffer-passwords tab to see if there are any passwords available to crack. These should be in the SMB passwords. If you are looking to get WiFi passwords, open the file directly in the cracker-802.11 tab.
C. Repeat this step until you see some results.
**
**STEP 4**
Cracking
A. Once you get your SMB encrypted passwords, send them to the cracker using a right-click.
B. I, personally, do not trust rainbowcrack, but it is up to you on a good method of cracking. I swear by Brute-Force cracks.
C. Crack the file using Cain's cracker & a Brute Force attack. Select NTLM-Challenge(I think that's what it's called).
Start Cracking!!!
**
**STEP 5**
Infiltrating
A. Once you get the password cracked, DO NOT DELETE IT!
B. Use the password to log on to the computer and install Abel(Network->Mircosoft Windows Network->(Their Workgroup Here)->Their Computer->Services->Install Abel)
C. Start up abel in the services
D. Connect To The Newly Created Abel Tree Item
E. Happy Hacking!!!
Download Cain & Abel
Download Wireshark
How To Sniff Passwords With Cain And Abel
Download
Cain and Abel Here: http://adf.ly/SnFrY
Run
Cain and Abel as administrator
Go
to the tab that says sniffer
Go to the upper right
corner under the Cain picture and enable the sniffer
select
your adapter (usually the one that has a listed Ip address)
Click
of the blue Plus sign
Leave
everything as is and press ok
Right
click on each of ip addresses that come up
Resolve
the host name for each one of them
Go
to the bottom of the screen and hit the APR tab
Click
on the top box
Click
the blue plus sign
Hind
the computer you want get passwords/information from in the left hand box
Highlight
everything that comes up in the righthand box
Go
to the upper right hand corner, by the sniffer and enable the APR poisener
To
Find passwords, go to the bottem of the screen where it says passwords
Here
you will find all usernames and passwords of the person you have poisened (Most
of
the passwords will be in HTTP)
If
you didn't understand this look below
refer to: original blogger
Top ten shortcut for linux
Friends today we are giving you the top ten shortcut for linux.
1: Ctl + Alt + Backspace
Use this shortcut when X isn’t responding or a program has locked up your desktop and you can’t get anything to respond. This combination instantly logs you out of X, taking you back to the login screen. It works with all desktop environments and window managers.
2: Ctrl + Alt + Delete
This is the big kahuna. If all else fails and you just need to reboot, you can hit this combination to instantly start the reboot process. All data will be lost, so use it wisely. This combination works in all desktop environments and all window managers.
3: Alt + Tab
This handy shortcut allows you to cycle through all open windows, stopping on the window you want to have focus. In other words, you don’t have to grab your mouse and click (or hover, depending upon your focus configuration) to give a window focus. To cycle through the windows, hold down the Alt key and then press the Tab key until you land on the window you want. This shortcut works in most desktop environments and window managers.
4: Ctrl + Alt + F*
This is one of those mack-daddy shortcuts you very well might need to use. It switches to various virtual terminals. The default terminal you’re working in is 6. So you can switch to another terminal by holding down Ctrl + Alt and hitting F1, F2, F3, F4, F5, F7, etc. Now these are virtual terminals, so if you already have a graphical interface going, you’ll only be able to work in a text-based terminal window. This is really good for debugging problems with the desktop or killing frozen applications when you don’t want to kill X completely.
5: Alt + Arrow key
If you’re using Linux, you probably know about the pager that allows you to have multiple desktops at one time. Instead of having to move your mouse to the edge of a screen, you can hit Alt and either the left or right arrow key to move from one desktop to another. This works in all desktop environments and window managers.
The following apply only to terminal (aka console) windows
6: Ctrl + a and Ctrl + e
If you are working in a text editor like Nano (from within a terminal window), you can get to the beginning of a line with Ctrl + a and the end of a line with Ctrl + e. These do not work in GUI applications. In a GUI application (such as OpenOffice), these combinations will work as they would in a normal desktop world. (For example, Ctrl + a will highlight all the text on a page.)
7: Ctrl + c
When you have a process running in a terminal window (say you’re following a process with the tail + f command), you can kill that process with the Ctrl + c combination.
8: Ctrl + z
This will zombie an application. If you have a process running in a terminal and you want the terminal back but don’t want to kill the application, you can hit Ctrl + z to send the process to the background. To get the process back, type fg.
9: Arrow up or Arrow down
The up or down arrow key, when in a terminal window, cycles through the history of commands you have issued in the terminal window. This is helpful for two reasons: You don’t have to retype commands all the time and you can more easily recall what commands have been run recently.
10: Ctrl + r
This is a handy command search tool. When you hit Ctrl + r, you are prompted to enter a character (or string of characters). You’ll have returned to you any previously issued command with that character or combination within. This is helpful because it does not discriminate between commands and switches. So if you can only remember a switch you used, you can enter that and the command will appear. When the command shows up you want, hit Enter to execute.
Muyar
refer to :: hackinsides
1: Ctl + Alt + Backspace
Use this shortcut when X isn’t responding or a program has locked up your desktop and you can’t get anything to respond. This combination instantly logs you out of X, taking you back to the login screen. It works with all desktop environments and window managers.
2: Ctrl + Alt + Delete
This is the big kahuna. If all else fails and you just need to reboot, you can hit this combination to instantly start the reboot process. All data will be lost, so use it wisely. This combination works in all desktop environments and all window managers.
3: Alt + Tab
This handy shortcut allows you to cycle through all open windows, stopping on the window you want to have focus. In other words, you don’t have to grab your mouse and click (or hover, depending upon your focus configuration) to give a window focus. To cycle through the windows, hold down the Alt key and then press the Tab key until you land on the window you want. This shortcut works in most desktop environments and window managers.
4: Ctrl + Alt + F*
This is one of those mack-daddy shortcuts you very well might need to use. It switches to various virtual terminals. The default terminal you’re working in is 6. So you can switch to another terminal by holding down Ctrl + Alt and hitting F1, F2, F3, F4, F5, F7, etc. Now these are virtual terminals, so if you already have a graphical interface going, you’ll only be able to work in a text-based terminal window. This is really good for debugging problems with the desktop or killing frozen applications when you don’t want to kill X completely.
5: Alt + Arrow key
If you’re using Linux, you probably know about the pager that allows you to have multiple desktops at one time. Instead of having to move your mouse to the edge of a screen, you can hit Alt and either the left or right arrow key to move from one desktop to another. This works in all desktop environments and window managers.
The following apply only to terminal (aka console) windows
6: Ctrl + a and Ctrl + e
If you are working in a text editor like Nano (from within a terminal window), you can get to the beginning of a line with Ctrl + a and the end of a line with Ctrl + e. These do not work in GUI applications. In a GUI application (such as OpenOffice), these combinations will work as they would in a normal desktop world. (For example, Ctrl + a will highlight all the text on a page.)
7: Ctrl + c
When you have a process running in a terminal window (say you’re following a process with the tail + f command), you can kill that process with the Ctrl + c combination.
8: Ctrl + z
This will zombie an application. If you have a process running in a terminal and you want the terminal back but don’t want to kill the application, you can hit Ctrl + z to send the process to the background. To get the process back, type fg.
9: Arrow up or Arrow down
The up or down arrow key, when in a terminal window, cycles through the history of commands you have issued in the terminal window. This is helpful for two reasons: You don’t have to retype commands all the time and you can more easily recall what commands have been run recently.
10: Ctrl + r
This is a handy command search tool. When you hit Ctrl + r, you are prompted to enter a character (or string of characters). You’ll have returned to you any previously issued command with that character or combination within. This is helpful because it does not discriminate between commands and switches. So if you can only remember a switch you used, you can enter that and the command will appear. When the command shows up you want, hit Enter to execute.
Muyar
refer to :: hackinsides
Hack To Change Your IP Address
1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "cmd" and hit ok
You should now be at an MSDOS prompt screen.
4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on
your desktop.
7. Click on "properties
You should now be on a screen with something titled "Local
Area Connection", or something close to that, and, if you have
a network hooked up, all of your other networks.
8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from
the list under the "General" tab
10. Click on "Use the following IP address" under the "General"
tab
11. Create an IP address (It doesn't matter what it is. I just type 1
and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet
Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again
You should now be back to the "Local Area Connection"
screen.
15. Right-click back on "Local Area Connection" and go to
properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif
18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address
refer to:: hackinsides.blogspot.com
2. Click on "Run"
3. Type in "cmd" and hit ok
You should now be at an MSDOS prompt screen.
4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on
your desktop.
7. Click on "properties
You should now be on a screen with something titled "Local
Area Connection", or something close to that, and, if you have
a network hooked up, all of your other networks.
8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from
the list under the "General" tab
10. Click on "Use the following IP address" under the "General"
tab
11. Create an IP address (It doesn't matter what it is. I just type 1
and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet
Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again
You should now be back to the "Local Area Connection"
screen.
15. Right-click back on "Local Area Connection" and go to
properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif
18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address
refer to:: hackinsides.blogspot.com
How To Delete Your Recycle Bin
If you're like me, you appreciate the clean desktop that XP offers.
Unfortunately, one item remains: the Recycle Bin. You can't get
rid of it through any menus or anything like that. After much
hacking around in the registry, I finally found the responsible key.
Simply Go Registry by typing regedit in run and following path
and delete this
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\C
urrentVersio n\Explorer\Desktop\NameSpace\ {645FF040-5081-
101B-9F08-00AA00 2F954E} and restart. When you restart, the
Recycle Bin is no longer on the desktop.
When you delete stuff, it still prompts to send it to the Recycle
Bin, as always. To fully delete something, just delete it from
C:\Recycled. or C:\Recycler (name depends on file system). To
view this folder, you have to have everything set to be seen,
including hidden folders and procted OS files and all that. Enjoy
this handy tweak! :)
Alternatively instead of deleting the key mentioned above you can
go to:
· HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\
Explorer\HideDesktopIcons\NewStartPanel
· and change the value for {645FF040-5081-101B-9F08-
00AA002F954E}to 1
refer to:: hackinsides.blogspot.com
Unfortunately, one item remains: the Recycle Bin. You can't get
rid of it through any menus or anything like that. After much
hacking around in the registry, I finally found the responsible key.
Simply Go Registry by typing regedit in run and following path
and delete this
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\C
urrentVersio n\Explorer\Desktop\NameSpace\ {645FF040-5081-
101B-9F08-00AA00 2F954E} and restart. When you restart, the
Recycle Bin is no longer on the desktop.
When you delete stuff, it still prompts to send it to the Recycle
Bin, as always. To fully delete something, just delete it from
C:\Recycled. or C:\Recycler (name depends on file system). To
view this folder, you have to have everything set to be seen,
including hidden folders and procted OS files and all that. Enjoy
this handy tweak! :)
Alternatively instead of deleting the key mentioned above you can
go to:
· HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\
Explorer\HideDesktopIcons\NewStartPanel
· and change the value for {645FF040-5081-101B-9F08-
00AA002F954E}to 1
refer to:: hackinsides.blogspot.com
Stopping a running process in linux:--
When you get stuck in any process which can't stop with 'force-quit', you can try stopping it from 'terminal' window. To stop a process or application from the 'terminal', you need to know the PID of the process so that you can that PID.
Given below are the set of commands that will stop a running process.
#ps -e
This will give the details of all processes that are running. Now we need to get the process ID(PID) of the application that we need to syop. For example, assume you are running Firefox on the system.
#ps -e | grep firefox
The above command will give you the PID of Firefox(which is '9' in thisd case). Now, this PId can be used as below to stop firefox.
kill -9 PID
refer to:: hackinsides.blogspot.com
Given below are the set of commands that will stop a running process.
#ps -e
This will give the details of all processes that are running. Now we need to get the process ID(PID) of the application that we need to syop. For example, assume you are running Firefox on the system.
#ps -e | grep firefox
The above command will give you the PID of Firefox(which is '9' in thisd case). Now, this PId can be used as below to stop firefox.
kill -9 PID
refer to:: hackinsides.blogspot.com
Accessory Flash Zip For Note2
ကဲ ကြ်န္ေတာ္ က ေတာ့ ထပ္ျပီး ေတာ့ တင္ေပးဦးမွာပါဘဲ။ ဒါေပမယ့္ ကြ်န္ေတာ္ အၾကိဳက္ Samsung ေတြမ်ားမယ္ထင္တယ္ဗ်ာ ။ ဟီးးးးးးး :P
အခုကေတာ့ ဖုန္းအ၀င္အထြက္အသံမ်ားကို ၾကည္လင္ပ်က္သားစြာ အသံဖမ္းဖို႔အတြက္ လုိအပ္တဲ့ဖိုင္ေလးရယ္
ကြ်န္ေတာ္လို Beat ေတြ နားေထာင္ဖို႔ ၾကိဳက္တဲ့ ကိုကို မ်ားအတြက္ ဖိုင္ေလးရယ္
အခုေနာက္ပိုင္း ကြ်န္ေတာ္အပါအ၀င္ေပ့ါဗ်ာ ဖြဘုတ္မွာ နာမည္ကို ကလိျပီးေတာ့ စာေရးထားတာေတြကို
ဖုန္းေတြမွာ ဖတ္ဖို႔အဆင္မေျပတတ္ပါဘူး။ အဲဒါကို အဆင္ေျပေစဖို႔ အတြက္ဖိုင္ေလးရယ္ပါ။
သြင္းပံုသြင္းနည္းကေတာ့
၁။ cwm recovery သြင္းထားရပါမယ္။
၂။ cwm မရွိရင္ေကာ မရဘူးလားလို႔ ရပါတယ္။ ဒါေပမယ့္ mobile odin & root access လိုသြားျပီ။ ဒါေပမယ့္ ကြ်န္ေတာ္ cwm ကေနဘဲေျပာျပေပးပါမယ္ခင္ဗ်ာ။
၃။ လိုအပ္တာမ်ားေဒါင္းျပီးသြားရင္ sdcard ထဲကို zip ဖိုင္မ်ားကို ထည့္လိုက္ပါခင္ဗ်ာ။
၄။ ဖုန္းကို ပါ၀ါပိတ္လိုက္ပါ ။ ျပီးရင္ေတာ့ recovery mode ကိုသြားပါမယ္။ (vol+) + home + Power ကို တြဲႏွိပ္ေပးပါ။
၅။ ေရာက္သြားျပီဆိုရင္ေတာ့ install zip from sd card ကိုသြားလိုက္ပါ။
၆။ choose zip from sdcard 0r ex sd card ကိုသြားျပီးေတာ့ ကိုယ္သြင္းခ်င္တဲ့ zip ဖိုင္ကို သြင္းလိုက္ပါခင္ဗ်ာ။
၇။ အကုန္ျပီးရင္ေတာ့ reboot system now လုပ္လိုက္ပါ။
၈။ ဒါဆိုရင္ သင့္ဖုန္းေလး နဲ႔ ဖလန္းဖလန္းထလို႔ရပါျပီခင္ဗ်ာ။
>>>>>>Download for Flash Zip file<<<<<<<<<
1. Beat Auido
2.Call Recoder
3.Emoji
4.Awesome Beats
ကြ်န္ေတာ္ Beat ကို ႏွစ္ခုထည့္ေပးလိုက္ပါတယ္ေနာ္ Beat Auido က Play Music မွာ ျပင္သြားတာျဖစ္ျပီးေတာ့ Awesome Beats ကေတာ့ သူက system app တစ္ခုအေနနဲ႔ ထြက္သြားမွာျဖစ္ပါတယ္ခင္ဗ်ာ။
စက္ရုပ္သံုးရင္ ေပ်ာင္ရႊင္နိုင္ပါေစေနာ္။ :P
အခုကေတာ့ ဖုန္းအ၀င္အထြက္အသံမ်ားကို ၾကည္လင္ပ်က္သားစြာ အသံဖမ္းဖို႔အတြက္ လုိအပ္တဲ့ဖိုင္ေလးရယ္
ကြ်န္ေတာ္လို Beat ေတြ နားေထာင္ဖို႔ ၾကိဳက္တဲ့ ကိုကို မ်ားအတြက္ ဖိုင္ေလးရယ္
အခုေနာက္ပိုင္း ကြ်န္ေတာ္အပါအ၀င္ေပ့ါဗ်ာ ဖြဘုတ္မွာ နာမည္ကို ကလိျပီးေတာ့ စာေရးထားတာေတြကို
ဖုန္းေတြမွာ ဖတ္ဖို႔အဆင္မေျပတတ္ပါဘူး။ အဲဒါကို အဆင္ေျပေစဖို႔ အတြက္ဖိုင္ေလးရယ္ပါ။
သြင္းပံုသြင္းနည္းကေတာ့
၁။ cwm recovery သြင္းထားရပါမယ္။
၂။ cwm မရွိရင္ေကာ မရဘူးလားလို႔ ရပါတယ္။ ဒါေပမယ့္ mobile odin & root access လိုသြားျပီ။ ဒါေပမယ့္ ကြ်န္ေတာ္ cwm ကေနဘဲေျပာျပေပးပါမယ္ခင္ဗ်ာ။
၃။ လိုအပ္တာမ်ားေဒါင္းျပီးသြားရင္ sdcard ထဲကို zip ဖိုင္မ်ားကို ထည့္လိုက္ပါခင္ဗ်ာ။
၄။ ဖုန္းကို ပါ၀ါပိတ္လိုက္ပါ ။ ျပီးရင္ေတာ့ recovery mode ကိုသြားပါမယ္။ (vol+) + home + Power ကို တြဲႏွိပ္ေပးပါ။
၅။ ေရာက္သြားျပီဆိုရင္ေတာ့ install zip from sd card ကိုသြားလိုက္ပါ။
၆။ choose zip from sdcard 0r ex sd card ကိုသြားျပီးေတာ့ ကိုယ္သြင္းခ်င္တဲ့ zip ဖိုင္ကို သြင္းလိုက္ပါခင္ဗ်ာ။
၇။ အကုန္ျပီးရင္ေတာ့ reboot system now လုပ္လိုက္ပါ။
၈။ ဒါဆိုရင္ သင့္ဖုန္းေလး နဲ႔ ဖလန္းဖလန္းထလို႔ရပါျပီခင္ဗ်ာ။
>>>>>>Download for Flash Zip file<<<<<<<<<
1. Beat Auido
2.Call Recoder
3.Emoji
4.Awesome Beats
ကြ်န္ေတာ္ Beat ကို ႏွစ္ခုထည့္ေပးလိုက္ပါတယ္ေနာ္ Beat Auido က Play Music မွာ ျပင္သြားတာျဖစ္ျပီးေတာ့ Awesome Beats ကေတာ့ သူက system app တစ္ခုအေနနဲ႔ ထြက္သြားမွာျဖစ္ပါတယ္ခင္ဗ်ာ။
စက္ရုပ္သံုးရင္ ေပ်ာင္ရႊင္နိုင္ပါေစေနာ္။ :P
Tuesday, July 23, 2013
How to hack/enable apps into multi-window mode on Galaxy Note 2
ကြ်န္ေတာ္ samsung crazy Note2 မွာ ပါတဲ့ multi window ကို ကိုယ္ၾကိဳက္တာ ေပါင္းထည့္လို႔ရေအာင္ ေျပာျပေပးပါမယ့္ခင္ဗ်ာ။။
ကဲ စလိုက္ၾကရေအာင္ လိုအပ္တာေလးေတြေဒါင္းလိုက္ပါဦး။တစ္ခုရွိတာက Root Access လိုပါတယ္ေနာ္။
1.Xposed Installer
2.Xposed Multiwindow
လိုအပ္တာေဒါင္းျပီးသြားျပီးဆိုရင္ အရင္ဆံုး install လုပ္လိုက္ပါခင္ဗ်ာ။ PCsuite မရွိသူမ်ားကေတာ့ memory card ထဲကို ထည့္လိုက္ပါခင္ဗ်ာ။ Settings :—>Security and enable (change) “Unknown Sources” ။ ဒါဆိုရင္ ကတ္ထဲက apk ဖိုင္မ်ားကို သိသြားျပီး တစ္ခ်က္ႏွိပ္ကာ install လုပ္လိုက္ပါခင္ဗ်ာ။
Xposed Installer ကို ဖြင့္လိုက္ပါ။
The End :P
စက္ရုပ္သံုးရင္းေပ်ာ္ရႊင္နိုင္ပါေစ ခင္ဗ်ာ။ ကြ်န္ေတာ္R4!n8ow တစ္ေယာက္ဆက္ျပီးအသဲကြဲလိုက္ဦးပါမည္။
arrrr...... ေမ့လို႔ ကြ်န္ေတာ္ wallpaper တင္ထားတာကို အရင္ၾကိဳေတာင္းပန္ထားပါတယ္ေနာ္။ ကြ်န္ေတာ္ ၾကိဳက္လို႔တင္ထားတာပါခင္ဗ်ာ။ ဘာရည္ရြယ္ခ်က္မွမရွိပါ။
Monday, July 15, 2013
Pattern lock & Password ကိုေက်ာ္ျဖတ္ၾကရေအာင္
ကဲ အရင္ဆံုး ကြ်န္ေတာ္ကေတာ့ Samsung crazy ဆိုေတာ့ Note2 & Galaxy Grand မွာ စမ္းထားပါတယ္။ မွတ္ခ်က္ ။ ။ root access ရွိရပါမယ္၊ usb debugging on ထားရပါမယ္။
အခုစလိုက္ၾကရေအာင္ဗ်ာ
ကြ်န္ေတာ္ screen ကို passwd နဲ႔ ပိတ္လိုက္ပါျပီ။ စက္ထဲမွာ adb tools file မရွိရင္ အရင္ေဒါင္းလိုက္ပါဦးခင္ဗ်။
>>>>>>>>>>Download Here<<<<<<<<<<
passwd - rainbow
ျပီးရင္ zip ဖိုင္ကို ျဖည္ခ်လိုက္ပါခင္ဗ်ာ။ adb tools folder ထဲ၀င္ျပီးေတာ့ လြတ္တဲ့ေနရာမွာ shift + right click ကို ႏွိပ္ကာ open command windows here ဆိုတာကိုႏွိပ္လိုက္ပါခင္ဗ်ာ။
ကဲဒါဆို စၾကမယ္ ။ အရင္ဆံုး driver သိမသိစမ္းလိုက္ရေအာင္
adb devices ဆိုျပီးရိုက္လိုက္ပါ။
ဒါဆို စက္က သိသြားပါျပီ။ ထပ္ျပီးေတာ့ adb shell လို႔ရိုက္ထည့္လိုက္ပါ။ ျပီးရင္ permission ေတာင္းဖို႔အတြက္ su ဆိုျပီးရုိက္လိုက္ပါ။ တခုရွိတာက adb shell ကို အရင္က permission ေပးထားဘူးရင္ ျပႆာနာမရွိဘူးဗ်။ မဟုတ္ရင္ အလြယ္နည္းကေတာ့ 91 pc suite ကို ဖြင့္လိုက္ပါ ။ screen lock ခဏပြင့္သြားျပီး root access ေတာင္းတာကို permisssion ယူထားလိုက္ပါ။
ဒါဆိုရင္ေအာက္ကပံုကိုၾကည့္လိုက္ပါ ။ su ကို permission ေပးျပီးသြားပါျပီ။
rm /data/system/password.key;id လို႔ ရိုက္လိုက္ပါ။ ဒါဆိုရင္ေမးလိမ့္ မယ္ vlaue တန္ဖိုးအတြက္ ကြ်န္ေတာ္က ထည့္လိုက္ပါတယ္။
rm /data/system/password.key;id=0 လို႔ရိုက္လိုက္ပါ။
ဖုန္းအား power key တခ်က္နွိပ္ၾကည့္လိုက္ပါဦး ။ လူၾကီးမင္းဧ။္ ေလာ့မရွိေတာ့ပါဘူးခင္ဗ်ာ။
ကဲေနာက္တစ္ခု အခု ကြ်န္ေတာ္ဖုန္းအား pattern lock ထပ္ခ်လိုက္ပါျပီ။
:P ကဲအေပၚကအတိုင္းဘဲ ဖုန္းကို ၾကိဳးခ်ိတ္ျပီးေတာ့ တဆင့္ခ်င္းရိုက္သြားလိုက္ပါခင္ဗ်ာ
adb devices - driver သိမသိ
adb shell - shell ထဲကို သြားပါမယ္။
su - permission တစ္ၾကိမ္ေပးထားတဲ့အတြက္ ဆက္လုပ္သြားပါမယ္။
rm /data/system/gesture.key - လို႔ရိုက္လိုက္ပါခင္ဗ်ာ။
ကဲဒါဆိုရင္ ဖုန္းကို power key တခ်က္နွိပ္ျပီးၾကည့္လိုက္ပါ။ pattern lock ေတာ့က်န္ေသးပါတယ္။ ဒါေပမယ့္ ၾကိုက္တာနွိပ္လို္က္ပါ ပြင့္သြားပါမယ္။
ကဲျပီးဆံုးသြားပါျပီခင္ဗ်ာ။ ဆရာၾကီးေတြအတြက္ကေတာ့ ရီခ်င္ရီလိမ့္ပါမယ္ခင္ဗ်ာ။ ဒါေပမယ့္ကြ်န္ေတာ္ကိုယ္တိုင္စမ္းျပီးေတာ့ မသိေသးဘူးမ်ားအတြက္ရည္ရြယ္ပါတယ္။
စက္ရုပ္သံုးရင္ေပ်ာ္ရႊင္နိုင္ပါေစေနာ္။။ :P
အခုစလိုက္ၾကရေအာင္ဗ်ာ
>>>>>>>>>>Download Here<<<<<<<<<<
passwd - rainbow
ျပီးရင္ zip ဖိုင္ကို ျဖည္ခ်လိုက္ပါခင္ဗ်ာ။ adb tools folder ထဲ၀င္ျပီးေတာ့ လြတ္တဲ့ေနရာမွာ shift + right click ကို ႏွိပ္ကာ open command windows here ဆိုတာကိုႏွိပ္လိုက္ပါခင္ဗ်ာ။
adb devices ဆိုျပီးရိုက္လိုက္ပါ။
ဒါဆိုရင္ေအာက္ကပံုကိုၾကည့္လိုက္ပါ ။ su ကို permission ေပးျပီးသြားပါျပီ။
rm /data/system/password.key;id=0 လို႔ရိုက္လိုက္ပါ။
adb devices - driver သိမသိ
adb shell - shell ထဲကို သြားပါမယ္။
su - permission တစ္ၾကိမ္ေပးထားတဲ့အတြက္ ဆက္လုပ္သြားပါမယ္။
rm /data/system/gesture.key - လို႔ရိုက္လိုက္ပါခင္ဗ်ာ။
စက္ရုပ္သံုးရင္ေပ်ာ္ရႊင္နိုင္ပါေစေနာ္။။ :P
Subscribe to:
Comments (Atom)